M Sand Manufacturing Machine In Tamilnadu
M Sand Manufacturing Machine In Tamilnadu
The dimensions of the new VSI5X1145 M Sand Manufacturing Machine
The difference between different types of New M Sand Manufacturing Machines is not only in performance, but also in size. The size of the crusher is an important factor affecting the investment process of the M Sand Manufacturing Machine. Because the size of the crusher affects the construction of the plant, the construction of different size of the plant needs investment. The cost is different. Here is to introduce the size of the new VSI5X1145 sand making equipment.
VSI5X1145 new M Sand Manufacturing Machine is a kind of sand making equipment. It plays an important role in the production of artificial sand and has a wide range of applications. It plays an important role in sand and stone yard, mixing station, dry powder mortar and construction waste crushing industries. It not only processes many kinds of materials, but also processes them. The effect is good, the finished product granularity can be adjusted, and the M Sand Manufacturing Machine uses a dual-purpose bulk tray, simple operation, to achieve two feeding modes-mdash; full-center feeding and central feeding with circular waterfall feeding-mdash; fast conversion, making production more efficient.
The dimensions of VSI5X1145 M Sand Manufacturing Machine are 5000 & times, 2790 & times, 3320mm, which represents the length and width of the crusher are 5000mm, 2790mm and 3320mm, respectively. The reference for this value is for the construction of factory sites. In addition, the soft material size of the crusher should not exceed 50mm. Hard material size can not be greater than 45mm, when using waterfall and central feeding production mode, its throughput is 500-640t/h, when using full-center feeding production mode, its throughput is 250-360, the M Sand Manufacturing Machine equipment in the production of the main engine speed is 1100-1310r/min, power is 220-times, for these parameters; The understanding of the number can help to set the parameters in the production of the machine, and can also be more convenient to distinguish different types of M Sand Manufacturing Machines.
VSI5X1145 new M Sand Manufacturing Machine works under two different feeding modes, the working principle is different, as follows:
1. Full-center feeding: the material falls into the hopper, enters the high-speed rotating rotor through the center feeding hole and is fully accelerated and thrown out through the launching port. First, it impacts a part of the material which falls freely after the rebound, then together it impacts the eddy material lining (or the counterattack block) in the surrounding swirl chamber, and then it is rebounded to the crushing first. The top of the chamber moves backward to move downward, colliding with the material emitted from the impeller runner to form a continuous material curtain, which is finally discharged through the lower discharge port.
2. Central feeding accompanied by circular waterfall feeding: the material falls into the hopper, and then falls through the circular hole, which is divided into two parts by the bulk tray. One enters the high-speed rotating impeller through the dividing tray, the other falls around the dividing tray, and the material enters the impeller. The material is accelerated rapidly in the impeller and thrown out at high speed. On the impact block, it is first rebounded to the top of the crushing chamber, then deflected to move downward, and collides with the material emitted from the impeller runner to form a continuous material curtain, and finally discharges through the lower discharge port.
This paper mainly introduces the external dimension of VSI5X1145 new type M Sand Manufacturing Machine, because the external dimension is related to the construction of the factory building, so it needs the attention of customers. Then it analyzes the other parameters of the machine and the working process under different working principles. For this type of M Sand Manufacturing Machine, the appropriate model. The selection and the application of suitable feed mode are important aspects of ensuring production efficiency.