Gold Ore Crushing And Screening

Gold Ore Crushing And Screening

Gold Ore Crushing And Screening

How to protect jaw plate of Gold Ore Crushing And Screening Machine?

The jaw plate of the Gold Ore Crushing And Screening Machine plays a great role in crushing materials. According to its relationship with movable jaw, the material can be squeezed, worn and curled, and then the crushing effect can be obtained. However, because the jaw plate in the work by a great force, so it is also damaged to a certain extent, to be protected.

The protection of the jaw plate is different from the general parts because it is often subjected to wear and tear. Then, in the selection of materials, we should be targeted, so as to make it play a better role. When the Gold Ore Crushing And Screening Machine works, the jaw plate bears plastic deformation wear and cutting wear. Therefore, the material used is required to have high hardness to resist plastic deformation fatigue and cutting wear. At the same time, he must have some toughness to prevent brittle exfoliation or fracture. In the actual selection of jaw plate material, we must fully understand the working conditions and wear mechanism, and then reasonable selection of jaw plate material.

When choosing the material of jaw plate of Gold Ore Crushing And Screening Machine, we should not choose blindly, but should combine the actual situation, and then select. The bigger the size of the Gold Ore Crushing And Screening Machine, the bigger the fragmentation of the crushed material, and the bigger the impact load on the jaw plate. So, when choosing the material, we should first consider improving the hardness of the jaw plate under the premise of ensuring the toughness, which is its selection principle. When faced with different crushing materials, such as granite, quartzite and limestone, the material of jaw board should be different. The higher the material hardness, the higher the corresponding jaw board hardness.

In the actual work of Gold Ore Crushing And Screening Machine, because the force mode of moving plate and fixed plate may be different from the wear mechanism, the moving plate bears greater impact force. First, toughness should be considered while the fixed plate is supported by the frame, so hardness can be given priority. When choosing the material of jaw board, we should also consider the technical and economic effects, and at the same time, we should also consider the rationality of its process, so that production is easy to organize production and control quality, which is also an important aspect.

When the Gold Ore Crushing And Screening Machine is working, pay attention to the use of the jaw plate, always observe its wear and tear, and then carry out related maintenance matters.

leave a comment