Raw Mill In Cement Plant

Raw Mill In Cement Plant

Raw Mill In Cement Plant

Cause analysis of excessive noise of Cement Raw Mill

In the process of mill production, excessive noise is a common phenomenon, normal noise is unavoidable, but if the noise is too large and accompanied by large vibration, we need to pay attention to, it is likely that Cement Raw Mill has abnormal conditions, in order to make Cement Raw Mill smooth and normal operation, users need to know its production. The reason for this is to suit the remedy to the case. Here are the reasons for the excessive noise of Cement Raw Mills.

Cement Raw Mill vibration: first of all, to distinguish between the vibration of the main engine or the vibration of the fan.

If it is the vibration of the main engine, we must first remove the trouble according to the exclusion method. First, look at the anchor bolts, tighten bolts; secondly, check the amount of feed is not too small and feed size, timely adjustment; thirdly, look at the wear degree of the blade, blade wear will lead to serious material can not be produced; then check whether the roller grinding ring of the Cement Raw Mill is deformed, in this order to check the movement When the noise of the crusher is too large, it is necessary to operate correctly when operating, so as to guard against accidents.

If the fan vibration is easy to solve, the fan vibration is mainly due to two reasons, one is the foot of the bolt loose, visible by sight, tighten the foot bolt can be; the other is a certain amount of dust on the blade, or uneven wear and tear, resulting in blade rotation imbalance drive fan vibration, this situation is clear In addition to dust accumulation or replacement of wind blades.

leave a comment