Stone And Gravel Quarry

Stone And Gravel Quarry

Stone And Gravel Quarry

What should I do if I encounter a temperature increase in the Stone And Gravel Quarry Machine?

The Stone And Gravel Quarry Machine is widely used in daily production and can be widely used in chemical, ceramic and other fields. The Stone And Gravel Quarry Machine we produce is of high quality and stable operation, but there are still some unexpected situations. In the process of production, the temperature rise inside the equipment is a common problem. Below we will help you analyze the specific reasons from a professional point of view:

1. In terms of mechanical equipment, because the Stone And Gravel Quarry Machine is in operation, especially when it stops grinding, it causes a large temperature difference on the grinding body, which causes significant thermal stress and thermal deformation, and sometimes even causes a Stone And Gravel Quarry Machine. Damage to the parts, such as geometric deformation of the lining, breaking of the lining bolts, etc. The thermal deformation causes a certain continuous force when starting after the stop grinding, and forms the current pulsation during operation and its own vibration; in addition, the heat of the Stone And Gravel Quarry Machine is transmitted to the main bearing, so that the temperature of the main bearing rises and the nursing is difficult.

2. From a process perspective, the wearability of the material decreases with increasing temperature. In the area with high fineness in the grinding, the fine particles of cement will rub against each other to produce electrostatic adsorption. In addition to coagulation, they are also adsorbed on the moving body of the Stone And Gravel Quarry Machine to form a so-called buffer layer, which significantly reduces the mobile crushing. Machine grinding effect; and the higher the temperature, the more serious the side effects of this cohesive grinding. In addition, the high temperature inside the Stone And Gravel Quarry Machine will cause the slow coagulation of the cement - the complete dehydration of the gypsum, causing the cement to pseudo-coagulate or rapidly set, affecting the quality of the cement. The higher the fineness, the more obvious the effect of temperature.

The main reason for the increase in the temperature of the Stone And Gravel Quarry Machine is the above two aspects. I hope that everyone can solve it according to the corresponding method. In fact, it is also possible to avoid the above problems. First of all, the quality of the equipment must pass, and there is still a normal time. Pay attention to the professional maintenance of equipment, often use lubricating oil, always keep the equipment running efficiently and prolong the service life of the equipment.

leave a comment