Quartz Processing Plant

Quartz Processing Plant

Quartz Processing Plant

Factors affecting the service life of the Quartz Processing Plant reducer

As the power transmission setting of the Quartz Processing Plant equipment, the reducer is a very important accessory in the Quartz Processing Plant. The normal operation of the Quartz Processing Plant cannot be separated from the speed reducer. As a well-known Quartz Processing Plant manufacturer in China, SBM has conducted in-depth research on the Quartz Processing Plant reducer. What are the factors that affect the service life of the reducer in the Quartz Processing Plant structure?

“When the reducer is shipped from the factory, it is usually necessary to run the equipment first. According to the regulations, the running-in period is about 200 hours.” Ctrip, a CB Quartz Processing Plant engineer, said that “the oil has to be changed over the running-in period.” It is prescribed according to the performance characteristics of the equipment in the early stage of the use of the reducer. The running-in period is an important part of ensuring the normal operation of the reducer, reducing the failure rate of the equipment and extending the service life of the equipment. So what are the factors that affect its service life?

  • 1. The installation and commissioning process of the Quartz Processing Plant reducer is not strict enough, and the problems found are not dealt with in time.
  • 2. The reducer has an overload phenomenon, such as a large defect.
  • 3, Quartz Processing Plant reducer itself is of poor quality, if there are large defects and so on.
  • 4. The maintenance and maintenance of the reducer is not enough. The equipment operation is not checked regularly on time.
  • 5. The maintenance of various indicating instruments is not enough, the instrument indication is incorrect, resulting in operational errors.
  • 6. Lubrication management is not enough. The selection of lubricating oil is unreasonable. The lubricating oil outlet end and the oil returning end screen are not cleaned in time, and the lubricating oil is not replaced in time according to relevant regulations.
  • 7. The operator is not familiar with the construction, performance, allowable load, lubrication and related technical parameters of the Quartz Processing Plant.
  • 8. The post responsibility system is not sound enough, such as: post responsibility system, post operation method, handover shift system, safety technology, etc.

Find the "cause" & rdquo; can cure the "disease", SBM believes that after understanding the factors affecting the service life of the Quartz Processing Plant reducer, pay attention to the use of the process, regular maintenance and maintenance, will effectively extend the deceleration The service life of the machine guarantees the orderly and stable production of the Quartz Processing Plant.

leave a comment