Grinding Machine For Wollastonite

Grinding Machine For Wollastonite

Grinding Machine For Wollastonite

What is the damage phenomenon of the bearing of the roller assembly of the Wollastonite Grinding Machine?

In the production of Wollastonite Grinding Machine, there are many factors leading to the stop of equipment production, such as wear and tear of parts, such as equipment blockage, etc. Here we want to introduce the damage of roller assembly bearing, this phenomenon is also an important factor causing the stop of Wollastonite Grinding Machine production, in order to ensure the smooth production. In order to solve this problem, what are the causes of bearing damage of roller assembly?

First, oil seal damage.

If the oil seal of the Wollastonite Grinding Machine is damaged, the bearing will be short of oil and ash. These conditions will cause the main factors of bearing lubrication failure and worn worse. Therefore, it is very necessary to inspect the oil seal. Generally, the oil seal is inspected regularly in production. In addition, the oil seal is inspected regularly. When there is a shortage of oil, it is necessary to add the oil quantitatively according to the instructions. It is not good to have too much or too little oil. The bearings should be cleaned regularly to avoid the damage caused by the accumulation of pollutants.

Cause two. The cover of the upper part of the grinding roller assembly and the screw of the sealing cover are loose.

During the long-term operation of the Wollastonite Grinding Machine, the screw of the cap is easy to be loosened, and the fine powder in the mill chamber will enter the assembly. If the bearing is blocked, the bearing will be locked. At this time, the roller will stop rotating, leading to abnormal operation of the Wollastonite Grinding Machine and bearing heating. In view of this situation, in the production of Wollastonite Grinding Machine, it is necessary to tighten and maintain the fixed screw on the roller assembly regularly.

Reason three, fatigue and destruction

For bearings, the more common way of damage is fatigue damage, and the causes of fatigue damage are: long-term overload operation of bearings, not timely maintenance, improper maintenance, equipment aging, etc. In view of these phenomena, in the long-term production process of Wollastonite Grinding Machine, for the maintenance and replacement of bearings, etc. Operations need to be taken seriously.

The above is mainly about the damage of the bearing of the grinding crusher assembly of the Wollastonite Grinding Machine. The analysis of this problem is more detailed, for the causes of damage to the roller assembly bearings and solutions are more detailed, in view of these situations, in order to reduce the damage to production, in the Wollastonite Grinding Machine work, you can periodically carry out these aspects. Check and repair to prevent failures.

leave a comment