Black Powder Ore Milling Equipment Operation and Maintenance

Black Powder Ore Milling Equipment Operation and Maintenance

Black Powder Ore Milling Equipment Operation and Maintenance

The Black Powder Ore Milling Equipment is a necessary equipment in the ore grinding process, and the value of the ore processing technology is not to be underestimated. In order to ensure the rapid production of the Ore Milling Equipment and prolong the service life, you must know some skills in the operation and maintenance of the Ore Milling Equipment.

Operation Techniques Of Black Powder Ore Milling Equipment

  • 1, before starting the machine, check every part of the equipment, check whether the bolt is loose, whether the lubrication is normal, whether the transmission device is reliable, and whether the instrument is sensitive.
  • 2, barring a week, check the part around whether there are obstacles, and timely clearance.
  • 3, after the full inspection without error, start the motor, pay attention to observe the change of current. The Black Powder Ore Milling Equipment can not be more than two times, each time the interval is more than 5 minutes, and it can not be started with other equipment so as to avoid the trip.
  • 4, the addition of steel ball should strictly follow the regulations, prohibit overloading operation. After normal operation, it should be strictly given to the mine and water supply, and the time of the empty turn should not exceed 15 minutes.
  • 5. After stopping the Ore Milling Equipment, it is necessary to stop the mine and then stop the water supply. After parking, the sanitation around the equipment will be cleaned up to ensure the safe and civilized production.

Maintenance Skills Of Black Powder Ore Milling Equipment

Due to the long-term operation of Black Powder Ore Milling Equipment in harsh environment, there will inevitably be some failures. Therefore, mastering some maintenance methods is very important for reducing the failure rate and prolonging the service life of Black Powder Ore Milling Equipment.

2.jpg

  • 1, one month after the use of Black Powder Ore Milling Equipment, a lubricating oil should be replaced. When replacing, it is necessary to thoroughly clean the opposing Ore Milling Equipment and clean up the previous lubricant. After the use of the process, to ensure that the replacement of oil every 6 months.
  • 2. Constantly monitoring the lubrication of each lubricating point, including the height of the lubricating oil surface, the state of lubrication and so on.
  • 3. The lubricating oil of the main bearing of the Black Powder Ore Milling Equipment, the temperature of the reducer should be less than 55 degrees Celsius, and should not exceed 60 degrees Celsius.
  • 4. In the operation of the Black Powder Ore Milling Equipment, once the abnormal noise, strong vibration, current fluctuation and other problems occur, the cause should be stopped immediately and adjusted in time.
  • 5. Check the use of the fasteners regularly to check whether the fasteners are loose, and whether the steel ball is worn out.
  • 6, regular inspection of vulnerable parts, and timely repair or replacement, the operation of any abnormal situation, all immediately stop inspection.
  • 7. To stop the Ore Milling Equipment properly on a regular basis and carry out a more comprehensive inspection of the overhaul.

4.jpg

Usually, the working strength of the Black Powder Ore Milling Equipment is high, so the probability of failure is also large, so the daily maintenance of the Black Powder Ore Milling Equipment is particularly important.

SBM is not only a professional Black Powder Ore Milling Equipment manufacturer, but also a service-oriented manufacturer. Technical experts will provide door-to-door installation, commissioning and maintenance services according to the production status of local processing plants, so that you can avoid worries and benefits.

leave a comment